Return to Previous Page

22X day night IR high Speed Dome GE-G622-IR

1/4" COLOR SONY EXview HAD CCD
Resolution 560 TV Lines - Min. illumination: 0.002Lux/F1.6
Lens: f= 3.9 - 85.8mm, Built-in 22X Optical Zoom module, X16 Digital
360° endless panning
Rotation speed: 0.5°-270°/sec (Pan); 0.5°-200°/sec (Tilt)
Max 400°/s speed at preset mode
128 positions, 8 guard tours, 8 pattern,
with heater and fans, 7 alarm input, 2 Relay output
Built - in OSD (D&N, BLC, Shuttle, Privacy Zones,Tiltle,…)
RS-485 interface, support Pelco-D and Pelco-P protocol
Giant Size High Power IR LEDs: Intelligent IR LED for Zoom
12 units IR LED, Max. 100m IR Distance
Real time Clock Overlay, Slip Ring Design, Ip66
True Day & Night (Exchange of two filters)

Specifications

Model GE-G622-IR
Zoom 22X Optical
Sensor 1/4 "SONY Super HAD CCD
Focal Length f=3.5 105mm
Horizontal Res 560TVLines
Minimum illumination 0.02Lux/F1.6 (ICR-ON,B/W Mode,50IRE)
S/N Ratio 52dB
Day Night True Day / Night with ICR Filter.
Panning Angle 360° Continuous rotation
Tilt Angle 0°~180°
Rotation speed 0.5°~270°/sec(Pan); 0.5°~200°/sec(Tilt)
Preset 255 User Defined Positions
Pattern 8Tracks
Tour 8 Guard Tours
Auto Scan 8 Groups
IR lighting distance 80-100m
OSD Time Date OSD Display for real-time and date embedded into screen image
OSD Coordinates Gives relative co-ordinates to north setting, for position control monitoring.
Privacy Masking User setting for Max of 8 privacy mask areas of user defined regions.
Alarm Alarms are set to be control with a time schedule for preset position and alarm linkage
Idle Time Auto set for idle time for preset or scan or tour settings.
Reset Control Auto set action on power reset for PTZ to go active into a defined action, tour scan etc.
OSD yes (D&N, BLC, Shuttle, Privacy Zones,Tiltle,)
Advanced Module dependant allow variance level of setting such as White balance  or WDR etc to be set via the OSD 
Video Output 1V p-p BNC Video
Alarm 7 alarm input 2 relay output,
Protection TVS 1500W Surge Protection
Other Functions Auto Flip, Auto Parking, Power Up Action etc.
Control Rs485 2400/4800/9600/19200
Protocol Pelco-P / Pelco-D User selectable
Rs485 Setting Hardware ID setup or OSD Software
Power Supply 24V AC/2A
Power Consumption 35W(Outdoor)
Working Temperature -10°c-+50°c /-40°c-+60°c (Heater/Fan Option)
Operating Humidity 10% - 85% RH
Approvals CE / FCC / RoHS Compliant / IP66 / Ik10